Wash Mitt
Why The Right Mitt Matters
A wash mitt's job is to lift dirt off the surface and hold it safely in the fibres until you rinse it out — not to just push dirt around. The wrong mitt, or using one mitt for everything, works against that.
Using the right mitt helps:
- Trap dirt away from the surface as you wash, rather than dragging it across paint
- Keep grittier wheel and brake dust contamination away from your paintwork
- Get a genuinely gentle wash on delicate painted surfaces
- Reduce the risk of swirl marks building up over repeated washes
Which Mitt Do I Need?
Duel Microfibre Wash Mitt — for paintwork. Plush, soft fibres designed to be gentle on paint while still lifting dirt effectively.
Plush Microfibre Wheel Mitt — for wheels only. Keep this one separate from your paintwork mitt, since wheels carry brake dust and grit that can scratch paint if the same mitt is used on both.
Wash Mitt FAQs
Everything you need to know about choosing and caring for your wash mitt.
Can I use the same mitt on my wheels and paintwork?
It's best not to. Wheels carry brake dust and heavier grime than bodywork, and using the same mitt on both risks transferring grit that can scratch your paint. Keep a dedicated wheel mitt separate.
How do I wash my mitt after use?
Rinse thoroughly in clean water straight after use, then machine wash separately with a dedicated microfibre detergent — avoid fabric softener, as it clogs the fibres and reduces how well the mitt lifts dirt.
How often should I replace my wash mitt?
Replace it once the fibres start matting down, feel rough, or won't rinse clean anymore. A worn mitt won't trap dirt the way it should, which increases the risk of marking paint.
Do I need two buckets to use a wash mitt properly?
It's strongly recommended. Rinsing your mitt in a separate bucket before reloading it with shampoo stops dirt being carried straight back onto the paintwork — see our Buckets & Grit Guards collection for set-ups.
Is a microfibre mitt better than a traditional sponge?
Generally yes. Microfibre traps and holds dirt within its fibres, while a sponge tends to push dirt around on the surface, which increases the risk of marking.
Contact is where most swirl marks actually happen — get it right.
Every stage before this matters, but the mitt is where dirt actually meets paint. Pair the right mitt with a proper two-bucket wash for the safest possible contact wash.